Air Sentry Adapters D-X series

Flange adapter slip fit
Flange adapter slip fit
Itemnumber: A-101

Flange Adapters: Are used with breathers having a 1" slip-fit connection, are used for reservoirs where the tank wall is not thick enough to allow for tapping threads.

Flange adapter 6 ANSI mounting holes Slip Fit
Flange adapter 6 ANSI mounting holes Slip Fit
Itemnumber: A-114

Flange Adapters: Are used with breathers having a 1" slip-fit connection, are used for reservoirs where the tank wall is not thick enough to allow for tapping threads.

Adapter 1
Adapter 1" MNPT x 1" Slip Fit
Itemnumber: A-102

Suitable for use with Air Sentry breathers that have a 1" slip fit connection, are intended for reservoirs or gearboxes with a wall thickness sufficient for a tapped hole. Male and female NPT and male BSP thread versions are available.

Adapter 3/4
Adapter 3/4" MNPT x 1" Slip Fit
Itemnumber: A-103

Suitable for use with Air Sentry breathers that have a 1" slip fit connection, are intended for reservoirs or gearboxes with a wall thickness sufficient for a tapped hole. Male and female NPT and male BSP thread versions are available.

Adapter 1/2
Adapter 1/2" MNPT x 1" Slip Fit - PSV
Itemnumber: A-409

Suitable for use with Air Sentry breathers that have a 1" slip fit connection, are intended for reservoirs or gearboxes with a wall thickness sufficient for a tapped hole. Male and female NPT and male BSP thread versions are available.

Adapter 1
Adapter 1" MBSP x 1" Slip Fit
Itemnumber: A-501

Suitable for use with Air Sentry breathers that have a 1" slip fit connection, are intended for reservoirs or gearboxes with a wall thickness sufficient for a tapped hole. Male and female NPT and male BSP thread versions are available.

Bayonet adapter slip fit
Bayonet adapter slip fit
Itemnumber: A-104

Replaces a standard breather cap on a hydraulic reservoir. Simply remove the breather cap, place the bayonet adapter on the breather flange, and rotate one-quarter turn.

Spin on adapter 1
Spin on adapter 1" - 12 female
Itemnumber: A-105

Replace the standard spin-on particle filters made by many manufacturers. These adapters fit Air Sentry breathers with 1" slipfit connections, are available in different sizes, and thread configurations. No tank modifications are required.

Spin on adapter 1
Spin on adapter 1" - 16 UNF
Itemnumber: A-106

Replace the standard spin-on particle filters made by many manufacturers. These adapters fit Air Sentry breathers with 1" slipfit connections, are available in different sizes, and thread configurations. No tank modifications are required.

Splash sentry 1
Splash sentry 1" MNPT x 1" MNPT
Itemnumber: A-310

Splash Sentry™ Anodized Steel Adapters

Splash Sentry is an anodized steel adapter, available in 1” MNPT and 2” MNPT, that protects the breather from splashing fluids when installed on mobile, off-road, or mining equipment.

Splash sentry 2
Splash sentry 2" MNPT x 2" MNPT
Itemnumber: A-311

Splash Sentry™ Anodized Steel Adapters

Splash Sentry is an anodized steel adapter, available in 1” MNPT and 2” MNPT, that protects the breather from splashing fluids when installed on mobile, off-road, or mining equipment.

Adapter 1/2
Adapter 1/2" FNPT x 1" slip fit - PSV
Itemnumber: A-410

Fits all breathers with slip fit connections

Bypass adapter
Bypass adapter
Itemnumber: A-110

Adapters for D&X series Breathers

Adapter 1 1/4
Adapter 1 1/4" FNPT
Itemnumber: A-118

Adapters for D&X series Breathers

Pressure relief valve use with AS-R111 5 PSI
Pressure relief valve use with AS-R111 5 PSI
Itemnumber: A-306
1
1" MNPT close adapter
Itemnumber: A-412

Adapters for D&X series Breathers